Share The Love

Monday, August 27, 2012

How Authentic Leadership Inspires The Best

The purpose of leadership isn’t to increase shareholder value or the productivity of work teams, though effective leadership does these things. Rather, the purpose of leadership is to change the world around you in the name of your values, so you can live those values more fully and use them to make life better for others. The process of leadership is to turn your values into a compelling cause for others.

After all, you can’t live your top personal values at work without the support of your people. But could they, without hesitation, pick your values from a long list? Could they describe the benefits of supporting those values? If the answer to either question is no—and for most senior managers it is—then you haven’t begun to see the performance your people are capable of.

To change this dynamic, you must reset the standard of what’s possible in the relationship between you and your people. In my experience, the best method for accomplishing this objective is to reveal “moments of truth”: the stories of how you know your values are real to you, where they came from and how you learned them, and the intimate and profound personal experiences—glorious or traumatic—that shaped your self-awareness.

To pull this feat off, you’ll have to step out from behind whatever protection your job title affords and make yourself willingly vulnerable. In doing so, you are saying: “From my experiences, this is what is most important about living.” By disclosing how your unshakable view of life priorities was formed, you are offering proof of your commitment to these values. One well-known senior executive took this advice to heart and told her staff about a savage yet triumphant experience that she had never previously revealed to most of her friends—and certainly never to her employees—in a way that underlined just how strongly she felt about her connection to them. This is her story.

One executive’s moment of truth

“I grew up in a very small town in the Deep South. There were two schools in our town: the white school and the black school. Since I’m black, I went to the black school, which didn’t have as many teachers or books or fun things as the white school. But I was a smart little girl, and my mother made up for the lack of resources when I got home every day. Before I could go out and play, we would sit at the dining-room table, and she would take down a big, old encyclopedia from the shelf and teach me about the world.

“One day I brought home a report card that was so good my mother said, ‘I think we can get you into the white school. Do you want to go?’ ‘Yes!’ I said, because I was a smart girl and I wanted to learn. I didn’t know that the school district was under a lot of federal pressure to integrate. Our family talked about it and decided that if the school would accept me, I would go—as long as my two older brothers transferred with me. My brothers didn’t want to go, but they loved their little sister and so they agreed. We would be the first black children at the school.

“I had only two dresses and I got to wear my church dress on my first day in school! I was assigned a seat in the back next to a little redheaded white girl and I immediately became best friends with her, the way little girls do. When the bell rang for recess, I went out to the schoolyard to play with my new friend and her other friends. All of the girls were on the schoolyard, and all of the boys were playing on the football field. A large wire fence separated the two areas. My new friend told me that boys and girls used to play together, but since my two brothers were here now the school had put up the fence to separate the boys from the girls.

“We were playing and screaming and laughing when we heard screaming of a different kind from the edge of the schoolyard. I looked up to see four huge men on horseback with masks on, carrying baseball bats. They were riding right at us. Everyone ran toward the school building. The teachers got there first and locked the doors behind them. As I was running, I could hear my brothers yelling my name. They were clawing at the fence, trying to save me, but the fence was too high.

“I was a fast little girl—weighed almost nothing, and most of it was legs. I was already almost to the bleacher seats stacked against the wall of the school building. I knew if I could scramble under those bleachers, the horses couldn’t get to me. I was just about to roll under the seats when I heard a scream I thought I recognized. I turned around and saw that one of the riders had grabbed my new friend by the hair—she had been playing with me—and was holding her a couple of feet off the ground. She was screaming and sobbing.

“I didn’t even stop to think. I just turned around and ran at that man on the horse. He was holding my friend on the left side of the horse. This horse was so big and it was sweating and its eyes were wild and glaring at me. It was trying to move around to kick me. I ran to the man’s right side and sunk my teeth into his leg, biting him as hard as I could.

“The good news is that he dropped my friend, but he picked me up instead. He dragged me by my arm across the concrete and two blocks outside the schoolyard. My Sunday dress got torn off. I was bruised all over, the skin on my back and side and left leg was in ribbons, and they told me that I lost a lot of blood. He left me lying in the street, but I don’t really remember that.

“My mother came to the hospital every day for five weeks. Every day, she brought my school lessons and that old encyclopedia and she would help me study the best I could. When I got out, she asked me what I wanted to do. ‘I want to go back to the white school and graduate,’ I said. And I did.

“I am a grown woman now. I am a successful executive. I am a wife and I am a mother. In this life, I have had an opportunity to learn what is most important to me, and what is most important to me is loyalty. The little white girl from that school is still my best friend today. I’m not willing to live without loyalty in my life and I’m not willing to have people I care about live without it.

“We have a lot of pressures on our team these days. You’re working very hard, and we often don’t get the cooperation we need from other departments. Things aren’t always easy for us, and I know that. I know this will change, because we will be the ones to change it. I just can’t tell you when it will change.

“But I can tell you this: if you are working for me and you ever get into trouble trying to do the right thing—I’m coming back for you.”

Postscript

As I’ve observed time and again in working with companies around the world, taking the risk to share a “moment of truth” can help make leaders better and produce real business benefits. But what if your story isn’t as jaw-dropping as this one?

The answer is that your story doesn’t have to be dramatic, only real. True epiphanies often come from a series of small moments—visible, for instance, only after reflecting on the decisions that first caused you to need your values or become aware of them. Indeed, simply looking at your values consciously often helps connect them to the specific moments—big or small—that made a difference to you then and can again now. Stan Slap  

HIRE JIM WOODS TO SPEAK WITH YOUR ORAGANIZATION 

Jim Woods is principal and founder of InnoThink Group. Jim is a business turnaround expert. His story is riveting. He has worked with government, U.S. Army, MITRE Corporation, Pitney Bowes, Whirlpool, and 3M. Jim’s business experiences, extensive research on competitive strategy and innovation have given him a fresh perspective on improving individual and organizational performance. Jim is a prolific speaker on strategic innovation, creative leadership, uncertainty and competitive strategy. Speak with us for consulting or speaking engagements call 719-266-6703 or click here for more information. 

Saturday, August 25, 2012

Armstrong and the tenuous nature of heroism - Zeno Franco

Editor's note: Zeno Franco is an assistant professor in the department of Family & Community Medicine at the Medical College of Wisconsin. He studies the social psychology of heroic action and disaster management and is a former U.S. Department of Homeland Security Fellow. He is a research adviser for the Heroic Imagination Project, an organization that teaches people how to overcome the natural human tendency to watch and wait in moments of crisis.

(CNN) -- We have many heroes: historic figures who battled for freedom, a man who jumps on the railway tracks to save someone from certain death, a whistle-blower who identifies corruption in government or industry. While these forms of heroism focus on a willingness to take risks in the service of other people or noble ideals, the most ancient notion of heroism focuses on humanity's ability to transcend its own physical limitations.

Occasionally, there is a man or woman who appears to be almost superhuman in strength and physical ability. The Greeks had Achilles and Athena. Up until yesterday, we had Lance Armstrong.

It is unlikely that we will ever know the truth about Lance Armstrong's situation -- was it truly a heroic journey, battling his own body's limits to demonstrate the pinnacle of human capability -- despite the intense personal costs of competing in the Tour de France? Or was it a tainted attempt to win glory? And why can't it ever be simple -- why can't we have a hero who is beyond reproach?

Cyclists say 'good riddance'

As a researcher who focuses on heroic action and the ascription of heroic status, I know that heroism is rarely simple. In fact, in a paper that I authored with my colleagues Kathy Blau and Dr. Philip Zimbardo, we argued that heroism is fundamentally paradoxical.

Zero Franco
Zero Franco

First, the action of heroism is typically an intensely private and personal endeavor, even when these actions are taken under the glaring spotlight of the media; but the ascription of heroic status is a fundamentally public activity -- the personal actions taken by one individual are observed and interpreted by others, rightly or wrongly.

If we consider the possibility that Armstrong's 500-plus drug tests were negative as an indicator that he never doped, this is an incredible testament not just to his physical strength, but his moral fortitude. If this is the case, he was able to resist an ongoing temptation that occurred in private, after all the cameras where off and the fans had gone home.

This brings us to our second paradox. It is human nature to at once hunger for and elevate exemplars of heroism, while we simultaneously often want to negate the actual actions of a real hero. One of the implications of our research is that all forms of heroism result in some level of controversy; seeing someone run into a burning building to save another may look heroic to one bystander but foolish to another.

Lance Armstrong faces lifetime ban

A lot rides on the outcome. If a woman who goes into a building is successful in rescuing the trapped victim in the inferno, she is a hero. But if she fails, or she is injured, the risk she took is seen as having been too great, even though the actual risk calculus she took in the moment of action does not change.

A snapshot of Lance Armstrong's future

Can the USADA strip Armstrong's titles?

Cycling: Armstrong faces ban, titles' loss

Moreover, someone willing to act heroically fundamentally challenges our own notions of ourselves. Heroes are, in some ways, subtly dangerous to our sense of social order. Even though they are human, just like the rest of us, their actions are outside of the normal human experience.

If there is a whistleblower in our office -- even if his or her motives are noble -- it is human nature to search for an alternative explanation. Maybe this person was really disgruntled at the boss. With Lance Armstrong, there is a natural tendency, perhaps in all of us, to say, "See, I told you so, no one could be that good."

The sad part of Armstrong's story -- of the titles being stripped away -- is that we lose either way. If he did dope, it is just another example in a recent string of high-profile heroic failures. Joe Paterno's career, built up over many years of good decisions, was washed away by an incident he should have acted on. The captain of the Costa Concordia's momentary lapse led to the deaths of 32 people; abandoning ship before his passengers led to his disgrace.

But if Armstrong didn't dope, it won't matter. The news cycles will have already done their work. There is doubt now, and that is often the beginning of the end of our willingness to attach the word "hero" to someone in our own minds.

We have lost a figure who was willing to challenge the limits of human performance, to show us what we are truly capable of if we put everything we have into accomplishing a seemingly insurmountable goal. Armstrong's story of setbacks and triumphs brought us closer to the essence of the human endeavor.

What's behind the Armstrong headlines?

While it is easy to say that one slip-up means someone can't be hero, it is also important for us to remember that negating all of this person's actions over a few mistakes also lets us off the hook. No hero is without flaws. None of us is. But if we allow ourselves the luxury of saying, "See, he's just like the rest of us," we no longer have to challenge ourselves to perform at the limits of our own personal capability.

 

Friday, August 24, 2012

Tom Peters - Big-Firm Innovation: Good Luck!

 

My columns are meant to help practicing managers. Yet when it comes to innovation, especially in big firms, I am stymied.

Strategy analyst Mike Kami says that Sears, Roebuck's "brand new" 1988 strategy is a carbon copy of its 1973 and 1983 "brand new" strategies. Nothing much seems to happen. And it's been 10 months since IBM's latest "radical" reorganization. We can expect another momentous upheaval any day, once again aimed at speeding up innovation.

In the 1985 book, Final Cut, the story of how conglomerate Transamerica concocted the all-time movie disaster, "Heaven's Gate," author Steven Bach cites screenwriter William Goldman's chief observation about Hollywood: "NOBODY KNOWS ANYTHING." I'd argue for putting Goldman's line on a plaque to be hung behind the desk of every big-firm executive involved with innovation.

Final Cut recently kept me up until 4:00 a.m. It does a top- notch job of capturing the day-to-day process of innovating in sizable firms. Bach was the head of production, later fired, for Transamerica's United Artists subsidiary. (The "Heaven's Gate" fiasco led to the dismantling of UA.)

Political considerations caused a dozen miscues. For starters, Bach failed to express the depth of his initial reservations about the project. As the newly appointed co-head of production, he didn't want to begin by shooting down his new colleague's pet project. Subsequently, standard big-company doctoring of bad news led to repeated false optimism. And then there was the equally standard lack of consequences following adverse outcomes; deadline slip after deadline slip led only to frenzied meetings, never decisive action.

But the biggest UA problem was money. Not too little, but too much. UA liked big bets; and Transamerica had very deep pockets. The brakes were never applied, and UA repeatedly stood idly by as Director Michael Cimino indulged his every over-done whim.

The woes resulting from Transamerica's too-deep pockets is almost interchangeable with the saga of Xerox's personal-computer blunder, described in gory detail by Douglas Smith and Robert Alexander in their new book, Fumbling the Future: How Xerox Invented, Then Ignored, the First Personal Computer.

Xerox's Palo Alto Research Center (PARC) is a lovely lab in a lovely setting, the compelling vision of then-Xerox chairman, Peter McColough. PARC was staffed with brilliant minds and awash in cash. Product after pioneering product was conceived at PARC. However, Xerox's Connecticut-headquarters team was preoccupied with turning back the challenge of IBM and Kodak, then Minolta and Canon in the copier business. PARC blissfully trundled on in pursuit of a dream -- an expensive toy, which someday would deliver. But someday never seemed to come. Visitors to PARC, like Apple's Steve Jobs, got turned on by what they saw. Jobs' exposure to Xerox's overcomplicated, overexpensive Star system gave him essential ideas for the Macintosh.

The book's epilogue tells the story best, listing the current occupations of former standouts at PARC: One founded GRiD Systems, the successful lap-top computer producer; two founded pioneering Metaphor Computer. A trio are senior officials at Apple Computer, and a score more are in key posts at Digital Equipment, Microsoft, et al.

In another book of the same genre, Fast Forward: Hollywood, the Japanese and the VCR Wars, author James Lardner lays out every pathetic detail surrounding the failure of RCA, Bell & Howell and a host of other big outfits to come up with a commercially successful VCR. The villains are the same: big-firm politics; too much money; too little accountability; grandiose plans; too much complication; too big a bet.

This series of books, mostly about failure, occasionally about success (Tracy Kidder's classic Soul of a New Machine), warrant more attention than the numerous management texts that lay out the ABCs of managing innovation.

Maybe the term "managing innovation" is part of the problem. It implies the possibility of rules and the reign of rationality. But innovation is hopelessly messy. Any honest recounting of either a simple or a complex innovation project reveals 10,000 unexpected twists and turns -- from problems with the science to the vagaries of getting customers to use anything new.

In fact, even the success tales are ultimately discouraging. Soul of a New Machine, for instance, documents the exploits of Data General's renegade group that developed a save-the-company mini- computer, after the firm's rich, central lab flopped. But the book mainly reveals the most unlikely set of circumstances that led to this rare success; replication would be all but impossible.

Ideas for managers? Autonomy for business units. Short deadlines. Low budgets. Lots of tries. Focus on small markets. Customers involved from the start. Would-be champions selected for passion and persistence more than for organizational or technical skills. These suggestions have merit, but even the track record of those who have tried them all is disheartening.

In the end, Goldman's advice -- NOBODY KNOWS ANYTHING -- may be the best starting point. Acknowledging the frightful innovation pitfalls and giving up dreams of the perfect innovation checklist or the "right" inspiring vision are big steps toward dealing realistically with the top management problem of our age: big- firm innovation in an increasingly ambiguous, crowded and fast- moving world.

1988 TPG Communications.

All rights reserved via tompeters.com

 

Monday, August 13, 2012

How To Survive The Crisis and Lead Through Uncertainty

The range of possible futures confronting business is great. Companies that nurture flexibility, awareness, and resiliency are more likely to survive the crisis, and even to prosper.

The future of capitalism is here, and it’s not what any of us expected. With breathtaking speed, in the autumn of 2008 the credit markets ceased functioning normally, governments around the world began nationalizing financial systems and considering bailouts of other troubled industries, and major independent US investment banks disappeared or became bank holding companies. Meanwhile, currency values, as well as oil and other commodity prices, lurched wildly, while housing prices in Spain, the United Kingdom, the United States, and elsewhere continued to slide.

As consumers batten down the hatches and the global economy slows, senior executives confront a more profoundly uncertain business environment than most of them have ever faced. Uncertainty surrounds not only the downturn’s depth and duration—though these are decidedly big unknowns—but also the very future of a global economic order until recently characterized by free-flowing capital and trade and by ever-deepening economic ties. A few months ago, the only challenges to this global system seemed to be external ones like climate change, terrorism, and war. Now, every day brings news that makes all of us wonder if the system itself will survive.

The task of business leaders must be to overcome the paralysis that dooms any organization and to begin shaping the future. One starting point is to take stock of what they do know about their industries and the surrounding economic environment; such an understanding will probably suggest needed changes in strategy. Even then, enormous uncertainty will remain, particularly about how governments will behave and how the global real economy and financial system will interact. All these factors, taken together, will determine whether we face just a few declining quarters, a severe global recession, or something in between.

Uncertainty of this magnitude will leave some leaders lost in the fog. To avoid impulsive, uncoordinated, and ultimately ineffective responses, companies must evaluate an unusually broad set of macroeconomic outcomes and strategic responses and then act to make themselves more flexible, aware, and resilient.

Strengthening these organizational muscles will allow companies not only to survive but also to seize the extraordinary opportunities that arise during periods of vast uncertainty. It was during the recessionary 1870s that Rockefeller and Carnegie began grabbing dominant positions in the emerging oil and steel industries by taking advantage of new refining and steel production technologies and of the weakness of competitors. A century later, also in a difficult economy, Warren Buffett converted a struggling textile company called Berkshire Hathaway into a source of funds for far-flung investments.

What we know

The financial electricity that drives our global economy is not working well. Turning it back on isn’t just a matter of flicking a switch, as central banks and governments have tried to do by providing liquidity, guaranteeing debt, and injecting capital into banks. We must repair the grid itself significantly, and this will require coordinated global action.

By the grid, we mean the global capital market, which evolved over a 35 year period following the breakdown of the Bretton Woods accord, in the 1970s. No one designed the global capital market, but it has been a boon to humanity, stimulating globalization and growth by enabling the free international flow of capital and trade. The financial crisis of 2008 severely damaged this useful system. Through greed, neglect, or ignorance, the participants abused it until they broke some of its basic mechanisms.

The implications are far reaching. Most obviously, congestion in the global capital market is exacerbating the US domestic credit crisis. That crisis has spread globally, hitting Europe especially hard. Banks until recently have been scrambling for deposits to replace sources of funding such as direct-issue commercial paper, medium-term notes, and asset-backed paper. The search for deposits is required to finance existing loans, and borrowers will need significantly more of them because all but the strongest have, like the banks, lost access to the securities markets. The US government, in particular, has aggressively tried to address this problem through huge liquidity programs, such as the purchase of mortgage- and other asset-backed securities. But it remains to be seen how effective those efforts will be in mitigating the credit crunch.

The global capital market crisis worsens this credit crunch by sending into reverse the dynamic of cross-border investment and trade flows. A dollar of capital must finance every dollar of trade, so the global capital market has stimulated the international exchange of goods and services. It has facilitated cross-border investments—in intellectual property, talent, brands, and networks—that help economies and companies grow and profit, and it has enabled the companies that make such investments to repatriate their profits. In short, global integration and growth will revive only if the global capital market does. Yet it has sustained a body blow that will have repercussions for years, even if international leaders make the necessary long-term adjustments.

The changing role of government

Since September 2008, governments have assumed a dramatically expanded role in financial markets. Policy makers have gone to great lengths to stabilize them, to support individual companies whose failure might pose systemic risks, and to prevent a deep economic downturn. We can expect higher tax rates to pay for these moves, as well as for the reregulation of finance and many other sectors. In short, governments will have their hand in industry to an extent few imagined possible only recently.

That’s not all. Protectionism and nationalism will probably feature more prominently in policy debates. We may see not only old-style populist anger against business, high executive compensation, and layoffs but also the emergence of authoritarian populist movements. Already-dilatory trade discussions will encounter renewed resistance. Although greater global coordination is sorely needed, national political pressures will make it hard to achieve. All this will constrain some business activities but also opens the door to new ventures that depend upon collaboration between the public and private sectors.

Deleveraging

The cheap credit of the past few years most likely won’t return for a long time. For many households, this will mean reducing consumption and postponing retirement; for financial institutions—increasingly, bank holding companies—much higher capital requirements, less freedom to operate and innovate, and probably lower profitability; for governments, even more limited resources for health care, education, pensions, infrastructure, the environment, and security; and for corporations, a different role for capital. More broadly, for many companies the high returns and rapid growth of recent years rested on cheap credit, so deleveraging means that expectations of baseline profitability and economic growth, as well as shareholder returns, must all be seriously recalibrated.

New business models and industry restructuring

Companies engaging with the capital markets will encounter funders who are less tolerant of risk, a reduced ability to hedge it, and greater volatility. Hardest hit will be business models premised on high leverage, consumer credit, large customer-financing operations, or high levels of working capital. Businesses with long or inflexible production cycles or very long-term investment requirements will find it especially difficult to manage their funding. Some won’t make it, so industries will restructure. Corporate leaders already recognize this: in a McKinsey Quarterlyexecutive survey launched the day after the US presidential election, 54 percent of the respondents expected their industries to consolidate.

These are all truths we know. They require a significant shift in thinking about government as a stakeholder, the value talent creates when it is harder to leverage, how to conserve capital, and strategies for sound risk taking—among other things.

What we don’t know

Yet there is much that we don’t know, and won’t for some time: how well will governments work together to develop effective regulatory, trade, fiscal, and monetary policies; what will these responses mean for the long-term health of the global capital market; how will its health or weakness influence the pace and extent of change in areas such as the economic role of government, financial leverage, and business models; and what will all this imply for globalization and economic growth?

Although these questions won’t be answered in the short or even the medium term, decisions made in the immediate future are critical, for they will influence how well organizations manage themselves now and compete over the longer haul. The winners will be companies that make thoughtful choices—despite the complexity, confusion, and uncertainty—by assessing alternative scenarios honestly, considering their implications, and preparing accordingly.

In particular, organizations must think expansively about the possibilities. Even in more normal times, the range of outcomes most companies consider is too narrow. The assumptions used for budgeting and business planning are often modest variations on baseline projections whose major assumptions often are not presented explicitly. Many such budgets and plans are soon overtaken by events. In good times, that matters little because companies continually adapt to the environment, and budgets usually build in conservative assumptions so managers can beat their numbers.

But these are not normal times: the range of potential outcomes—the uncertainty surrounding the global credit crisis and the global recession—is so large that many companies may not survive. We can capture this wide range of outcomes in four scenarios. 

This research, focusing on the United States, the center of the storm, suggests that if capital markets rebound quickly, GDP would be 2.9 percentage points lower than it would have been if trend growth had continued over the next two years. If financial markets take longer to recover, as the middle two scenarios envision, US GDP growth could fall 4.7 to 6.7 percentage points from trend over the same period. At the “long freeze” end of the spectrum, Japan’s “lost decade” shaved 18 percentage points from GDP compared with its previous growth trend.

Regenerated global momentum

In the most optimistic scenario, government action revives the global credit system—the massive stimulus packages and aggressive monetary policies already adopted keep the global recession from lasting very long or being very deep. Globalization stays on course: trade and capital flows resume quickly, and the developed and emerging economies continue to integrate as confidence rebounds quickly.

Battered but resilient

In the second scenario, government-wrought improvements in the global credit and capital market are more than offset—for 18 months or more—by the impact of the global recession, which leads to further credit losses and to distrust of cross-border counterparties. Although the recession could be longer and deeper than any in the past 70 years, government action works, and the global capital and credit markets gradually recover. Global confidence, though shaken, does rebound, and trade and capital flows revive moderately. Globalization slowly gets back on course.

Stalled globalization

In the third scenario, the global recession is significant, but its intensity varies greatly from nation to nation—in particular, China and the United States prove surprisingly resilient. The integration of the world’s economies, however, stalls as continuing fear of counterparties makes the global capital market less integrated. Trade flows and capital flows decline and then stagnate. The regulatory regime holds the system together, but various governments overregulate lending and risk, so the world’s banking system becomes “oversafe.” Credit remains expensive and hard to get. As attitudes become more defensive and nationalistic, growth is relatively slow.

The long freeze

Under the final scenario, the global recession lasts more than five years (as Japan’s did in the 1990s) because of ineffective regulatory, fiscal, and monetary policy. Economies everywhere stagnate; overregulation and fear keep the global credit and capital markets closed. Trade and capital flows continue to decline for years as globalization goes into reverse, and the psychology of nations becomes much more defensive and nationalistic.

Leading through uncertainty

These descriptions are intentionally stylized to enliven them; many permutations are possible. Scenarios for any company and industry should of course be tailored to individual circumstances. What we hope to illustrate is the importance for strategists of considering previously unthinkable outcomes, such as the rollback of globalization. Unappealing as three of the four scenarios may be, any company that sets its strategy without taking all of them into account is flying blind.

So executives need a way of operating that’s suited to the most uncertain business environment since the 1930s. They need greater flexibility to create strategic and tactical options they can use defensively and offensively as conditions change. They need a sharper awareness of their own and their competitors’ positions. And they need to make their organizations more resilient.

Most companies acted immediately in the autumn of 2008 when credit markets locked up: they cut discretionary spending, slowed investment, managed cash flows aggressively, laid off employees, shored up financing sources, and built capital by cutting dividends, raising equity, and so forth. While prudent, these actions probably won’t produce the short-term earnings that analysts expect, at least for most companies. In fact, it’s time they abandoned the idea that they can reliably deliver predictable earnings. Quarterly performance is no longer the objective, which must now be to ensure the long-term survival and health of the enterprise.

More flexible

Companies must now take a more flexible approach to planning: each of them should develop several coherent, multipronged strategic-action plans, not just one. Every plan should embrace all of the functions, business units, and geographies of a company and show how it can make the most of a specific economic environment.

These plans can’t be academic exercises; executives must be ready to pursue any of them—quickly—as the future unfolds. In fact, the broad range of plausible outcomes in today’s business environment calls for a “just in time” approach to strategy setting, risk taking, and resource allocation by senior executives. A company’s 10 to 20 top managers, for example, might have weekly or even daily “all hands on deck” meetings to exchange information and make fast operational decisions.

Greater flexibility also means developing as many options as possible that can be exercised either when trigger events occur or the future becomes more certain. Often, options will be offensive moves. Which acquisitions could be attractive on what terms, for instance, and how much capital and management capacity would be required? What new products best fit different scenarios? If one or more major competitors should falter, how will the company react? In which markets can it gain share?

As companies prepare for such opportunities, they should also create options to maintain good health under difficult circumstances. If capital market breakdowns make global sourcing too risky, for example, companies that restructure their supply chains quickly will be in much better shape. If changes in the global economy could make a certain kind of business unit obsolete, it’s critical to finish all the preparatory work needed to sell it before every company with that kind of unit reaches the same conclusion.

A crisis tends to surface options—such as how to slash structural costs while minimizing damage to long-term competitiveness—that organizations ordinarily wouldn’t consider. Unless executives evaluate their options early on, they could later find themselves moving with too little information or preparation and therefore make faulty decisions, delay action, or forgo options altogether.

More aware

As problems with credit destroy and remake business models and market volatility whipsaws valuations, companies desperately need to understand how their revenues, costs, profits, cash flows, risks, and balance sheets will fare under different scenarios. With that information, executives can plan for the worst even as they hope for the best. If the recession lasted more than five years, for example, could the company survive? Is it prepared for the bankruptcy of major customers? Could it halve capital spending quickly? The answers should help companies to be better prepared and to recognize, as early as possible, which scenario is developing. That is critical knowledge in a crisis, when lead times disappear quickly and companies can seize the initiative only if they act before the entire world understands the probable outcome.

Better business intelligence promotes faster, more effective decision making as well. Companies can often gain insights into the potential moves of competitors by weighing news reports about their activities, stock analyst reports, and private information gathered by talking to customers and suppliers. Such intelligence is always important; in a crisis it can make the difference between missing opportunities to buy distressed assets and leaping in to snare them.

To get this kind of business intelligence, companies need a network, typically led by someone with strong support from the top. This executive’s mandate should include creating “eyes and ears” across businesses and geographies in particular areas of focus (such as the competition’s response to the crisis), as well as gathering and exchanging information. A network is critical because information is most useful if it moves not just vertically, up and down the organization, but also horizontally. Salespeople in a network, for example, should exchange knowledge about what’s working in economically distressed regions so that employees can help each other.

Assembling bits of information, facts, and anecdotes helps companies to make sense of what’s happening in an industry. Say, for example, that a supplier says it has no difficulties with funding, though first-hand knowledge from other sources indicates that the company is struggling to meet its payroll. Such warnings can allow executives to get a full picture much more quickly than they could by sitting in their offices and interacting only with direct subordinates.

More resilient

A crisis is a chance to break ingrained structures and behaviors that sap the productivity and effectiveness of many organizations. Such moves aren’t a short-term crisis response—they often take a year or more to pay dividends—but are valuable in any scenario and could help a company survive if hard times persist. Although employees may dislike this approach, most will understand why management aims to make the organization more effective.

This may, for example, be the time to destroy the vertical organizational structures, retrofitted with ad hoc and matrix overlays, that encumber companies large and small. Such structures can burden professionals with several competing bosses. Internecine battles and unclear decisions are common. Turf wars between product, sales, and geographic managers kill promising projects. Searches for information aren’t productive, and countless hours are wasted on pointless e-mails, telephone calls, and meetings.

Experience shows that streamlining an organization to define roles and the way those who hold them collaborate can greatly improve its effectiveness and decision making. When jobs must be eliminated, the cuts mostly reduce unproductive complexity rather than valuable work. As Matthew Guthridge, John R. McPherson, and William J. Wolf point out in “Smart cost-cutting in the downturn: Upgrading talent” (available on December 4), Cisco took that approach in shedding 8,500 jobs in 2001. When the company redesigned roles and responsibilities to improve cooperation among functions and reduce duplication of effort, talented employees were more satisfied in a more collaborative workplace.

In fact, many functional areas offer big opportunities: greater effectiveness, lower fixed costs, freed-up capital, and reduced risk. This could be the moment to redefine and reprioritize the use of IT to increase its impact and cut its cost. Other companies could seize the moment to control inventory; to reexamine their cash flow management, including payments and receivables; or to change the mix of marketing vehicles and sales models in response to the rising cost of traditional media and the growing effectiveness of new ones.1

As customer preferences change, competitors falter, opportunities to gain distressed assets emerge, and governments shift from crisis control to economic stimulus, the next year or two will probably produce new laggards, leaders, and industry dynamics. The future will belong to companies whose senior executives remain calm, carefully assess their options, and nurture the flexibility, awareness, and resiliency needed to deal with whatever the world throws at them.  Lowell Bryan is a director in McKinsey’s New York office, and Diana Farrell is director of the McKinsey Global Institute.

 Provocative. Engaging. Riveting. Memorable. HIRE JIM WOODS TO SPEAK WITH YOUR ORAGANIZATION.   Testimonial

 “The response from everyone I talked to was that they all thought Jim Woods was fabulous. They appreciated his passion about innovative leadership. The  preparation he did to tailor his presentation was wonderfully inspiring.”  Association Leader 

Jim Woods is principal and founder of InnoThink Group. Jim is a business turnaround expert. His story is riveting. He has worked with government, U.S. Army, MITRE Corporation, Pitney Bowes, Whirlpool, and 3M. Jim’s business experiences, extensive research on competitive strategy and innovation have given him a fresh perspective on improving individual and organizational performance. Jim is a prolific speaker on strategic innovation, creative leadership, uncertainty and competitive strategy. Speak with us for consulting or speaking engagements call 719-266-6703 or click here for more information. 

Keynote address

Half Day

Full Day

 

Tuesday, August 7, 2012

Manufacturing Innovation: Reducing risk in your manufacturing footprint

Manufacturers of all types seek the same holy grail: the strategy that delivers products at the lowest possible total landed cost. In search of that goal, over the past few years companies all over the world have relocated facilities, outsourced production to low-cost countries, invested in automation, consolidated plants, or fundamentally redefined relationships with suppliers.

Establishing the cheapest manufacturing footprint becomes infinitely more elusive when basic assumptions change fast and furiously, as they have in the past year. Redesigning the footprint can be the biggest and most important transformation a manufacturer can undertake. Yet too many managers choose the footprint by using only a single set of future cost and demand assumptions. Any manufacturing footprint exposes companies to risks, such as changes in local and global demand, currency exchange rates, labor and transportation costs, or even trade regulation. A wrong bet can transform what should be a competitive advantage into a mess of underutilized or high-cost assets.

In our experience, the missing ingredient in many manufacturing-strategy decisions is a careful consideration of the value of flexibility. Companies that build it into their manufacturing presence can respond more nimbly to changing conditions and outperform competitors with less flexible footprints. As the current economic turmoil illustrates, the greater the level of uncertainty, the greater the value of flexibility. This is not surprising; real-options theory (see sidebar, “What are real options?”) maintains that flexibility is more important when volatility is more intense. To capture this value and gain the best position for responding to future economic changes, all companies should integrate flexibility into their manufacturing-footprint or sourcing decisions.

Sources of flexibility

Some sectors understand the importance of flexibility. Peak-demand power plants, for example, are inherently quite costly but play an important role in the market because they can quickly be brought online for short periods when high energy demand drives up electricity prices. Petroleum refineries can alter their product mix weekly (or even daily), basing these changes on the relative prices of different distillates, product inventories, and the price and availability of crude oil.

Industrial examples are less common. Honda’s East Liberty, Ohio, plant can switch in minutes from producing the Civic, an economical passenger car, to the crossover sport utility CR-V. The Southeast Asian plant of a construction-equipment manufacturer was designed to make two different products on the same assembly line. Every month, the plant can switch production schedules to meet Chinese, Southeast Asian, and Indian demand for either product.

Many manufacturers, however, fail to assess the flexibility and resilience to risk of their manufacturing footprint options, much less invest in flexibility to make themselves more responsive. Flexibility in a company’s manufacturing footprint may take a number of forms: for instance, the ability to adjust overall production volumes up or down efficiently, depending on demand and profitability; to change the production mix among different products or models; or to adapt the timing of production by shortening lead times or committing the company to production volumes later than competitors do. A flexible footprint can also manifest itself in a company’s dispatch optimization—its ability to adjust the country or facility from which products or parts are sourced in order to minimize the total landed cost at the desired destination, given actual market conditions.

When companies build in these sources of strategic flexibility, they can respond tactically to risks such as changes in local demand, currency levels, labor rates, tariffs, taxes, and transportation costs. Toyota Motor, for instance, has increasingly placed its manufacturing plants around the world for maximum responsiveness to local market conditions—starting with its NUMMI joint venture with GM in California during the 1980s. By 2004, Toyota realized that these efforts had significantly reduced its overall risk exposure (currency risk, in particular) by matching the currencies of local costs and revenues.

Valuing and liberating flexibility

We find it useful to distinguish between two types of flexibility. The first is flexibility within the four walls of any given manufacturing facility. Plant flexibility might be manifested, for example, when a manufacturing manager decides whether to change production levels at a given factory or a purchasing manager decides which supplier to use. While the decision itself is simple, increasing an individual plant’s flexibility is often fairly expensive: for example, it can mean adding capacity, adopting more expensive tooling to facilitate mix changes, or negotiating more flexible labor or supplier agreements.

The second type of flexibility, at the level of a company’s network of plants, calls for integrating information from around the enterprise to make networkwide optimization decisions. One US manufacturer, for example, expected to serve customers in North America from plants in North and Central America and customers in Europe from European plants. When demand increased in the United States, however, falling shipping costs, a stronger US dollar, and capacity constraints made it worthwhile for the company to ramp up European production as much as possible and to ship products across the Atlantic. The specific balance of production and transportation costs in each of the three plants required a holistic view of the whole network (and, in this case, a new shipping flow).

While the decisions (and the information requirements) for this second kind of flexibility are more complex, increasing it may be less expensive than building flexibility within an individual plant. Indeed, the more complex the footprint, the more likely that some sort of hidden network flexibility is readily available. A company with a multinational footprint, for example, might have significant potential flexibility to adjust production levels and shipping flows between different regions in response to changing local economic conditions. It could realize this possibility only if it had sufficiently transparent sources of information and made managers responsible for exploiting them.

Consider the example of a heavy-equipment manufacturer exploring potential new footprints to reduce its cost base and maintain its competitive position against low-cost entrants. The leading new footprint option—to build new plants in developing countries and to reallocate the product mix and capacity of existing plants—was clearly more cost-effective given the expected evolution of demand and costs. Nonetheless, increased currency exposure and transportation flows would significantly raise the company’s overall level of risk. Once managers incorporated flexibility into their analysis, however, the new footprint option became significantly more attractive. They then realized that a more geographically diversified footprint would enable them to respond more easily to unexpected changes in costs or demand—an ability that lowered both the expected unit cash cost and the uncertainty. In effect, the new footprint provided very concrete and valuable real options. Capturing them required an incremental increase in investment, but the lower unit costs and greater flexibility were clearly worthwhile.

In this instance, flexibility improved the case for what was already a worthwhile new footprint investment. But suppose that had been one of two possible new footprint options. Basing the decision between them solely on expected costs, without considering flexibility—as many companies do—would probably have made the company choose the costlier option (exhibit).

What should companies do?

The example above shows that if companies take risk and flexibility into account when they make manufacturing-footprint decisions, they can make better ones, particularly under high uncertainty. To capitalize on that opportunity, companies must take several steps.

Phase 1: Modeling landed costs

The starting point for exploring manufacturing-footprint options is a detailed landed-cost model for all options under consideration. To understand the cost of manufacturing and delivering a unit of each product to each destination, managers must also understand the marginal costs of producing and shipping more or fewer units. This is trickier than it seems, since the financial systems of many companies tend to track the required factor cost items only on a plant-by-plant level. Cutting the numbers with sufficient granularity will require a combined effort involving the finance function and the shop floor, as well as the design team for the options being considered.

Phase 2: Exploring risk and flexibility

In this phase, managers need to assess the risks affecting costs and demand. Some risks can be assessed fairly easily: for example, local GDP growth may influence local industry demand directly, and the evolution of local labor rates may feed straight into factor costs. Others risks are a bit more challenging, since they affect more than one element of the cost base. Energy prices, for instance, typically appear not only as a direct manufacturing cost but also as a contributor to transportation costs—both in shipping products to end-user markets and in shipping modules or parts from factories or suppliers to assembly. Currency risk, which can be particularly difficult to assess accurately, is often a critically important consideration, as well.

Besides understanding the risks, managers need to understand the sources of flexibility in each footprint option. Which combinations of production volume, mix, dispatch, and timing are available for each? How is flexibility constrained—for example, by maximum production capacity or transportation bottlenecks. What can be done within the four walls of an individual plant and what at the level of the plant network? The heavy-equipment manufacturer discussed above built its model for over 60 products, a dozen geographic regions, and 50 partially correlated risk factors.

In our experience, the principal difficulty in this phase is tracking the impact of different risk factors and flexibility decisions through all of the line items. Effects can be hidden—for instance, increases in the price of energy affect costs not only for manufacturing but also for transportation, as well as supplier costs that may be passed on through escalation clauses.

Phase 3: Quantifying the trade-offs

To make the cost and flexibility trade-offs for different footprint options, companies must combine the risks and sources of flexibility with base-case demand predictions and landed-cost models. A variety of analytical techniques are available. If just a handful of largely independent uncertainties really matter, managers may need only a simple computation of the economics of each footprint option in a small set of scenarios. When the number of variables is larger and their relationships are more complicated, probabilistic modeling often makes more sense, as it did for the heavy-equipment manufacturer. In such cases, it’s essential to program the model with rules for the managerial flexibility each footprint option allows—rules such as “if demand exceeds capacity, start a third shift” or “ship units from Mexico if they turn out to be cheaper than units from Indonesia.” The heavy-equipment manufacturer ran several thousand Monte Carlo scenarios on its model, recalculating capacity and dispatch flows according to economic conditions.

Both scenario analysis and probabilistic modeling are only as good as the quality of a company’s understanding of its key assumptions. What’s needed is a combination of what-if analysis, external data, expert predictions, stress testing, and extrapolation from the available historical data.

Phase 4: Making the choice and improving value

The calculations described above often clarify which footprint choice is best under a broad range of situations. Some options might provide the lowest landed costs even in the face of broad swings in economic conditions. In other cases, one option beats out others only because greater flexibility helps a company adapt more successfully to certain kinds of change, such as increased competition or regional fluctuations in demand. A footprint that seems more expensive or that requires a higher level of investment might be worthwhile for the extra flexibility.

Debating these possibilities will probably generate additional ideas to enhance a company’s flexibility. Managers of a liquid-natural-gas (LNG) supplier, for instance, were considering whether efforts to acquire or develop a number of gas fields, pipelines, and LNG terminals would provide greater flexibility in responding to regional imbalances in demand. Analysis confirmed that they would do so but also showed that the company could capture extra value by improving its dispatch capabilities to change network flows in its whole portfolio of assets. The company believed that this additional network flexibility, requiring only new managerial skills and information systems but no physical modifications, would have an economic value easily exceeding the additional investment.

Finally, it’s worth stressing that the work doesn’t stop with adjusting the network. Managers face a constant stream of decisions, such as investing in modernization, adding new capacity, and introducing new products. That’s in addition to more day-to-day decisions in production planning to capture the value of—and preserve—the network’s flexibility. Making such decisions typically requires the use of ongoing coordination mechanisms across plants, appropriate steps to measure and plan capacity, and the adjustment of metrics that emphasize the value of the whole enterprise, as opposed to individual plants. Such activities, worthwhile in themselves, are doubly important if network flexibility is a key part of a new footprint’s value.  Quarterly

About the Authors

Eric Lamarre is a director in McKinsey’s Montréal office, where Martin Pergler and Gregory Vainberg are consultants.

The authors would like to thank Vijai Raghavan for his contributions to this article

 

Monday, August 6, 2012

Innovate to Win or Else

Believe in Innovation to Win

It's viewed as a leading indicator of future growth and profitability, so why don't all companies innovate? The culture has to be born and bred in the company

There is no doubt most companies today are big believers in the idea of innovation. Its importance is heralded in corporate visions and mission statements. The chief executive officer speaks its glory in almost every speech, and its importance is celebrated on internal posters as well as in the company's marketing materials.
It's simple: Wall Street believes innovation is the leading indicator of future growth and profitability. There's even an index fund that just invests in what it thinks are the country's 20 most innovative companies. So how come we're not being overwhelmed by innovative new products and services? Unfortunately, that's simple to answer as well.
Saying you believe in something is one thing. Living what you believe is another. Let's not fool ourselves. Even the biggest "glass-is-half-full" optimist has to concede the reality: Most companies don't believe in innovation enough to do much more than pretend.

Three Common Approaches

You can see the proof of that in three approaches companies typically take to try to show the world they're innovative:
1. The big sweeping announcement. "Five years from now, we will get 50% (or some other big number) of our revenues from products that don't exist today," the chairman announces with great fanfare. Everyone applauds, and then absolutely nothing changes about the way the company does business.
2. Let's make a list. The company hires an ideation company to help it brainstorm all the things it might want to add innovation to, and then nothing happens—due to turf wars over resources or a lack of commitment to the idea by people who say, "I would have loved to do something with that list, but I had to keep doing my day job."
3. The innovation drive-by. The organization hires a company like ours to help it create a new product quickly. But like anything new within the company, it ends up being mired in internal politics, bureaucracy ("Whose budget do we charge for this?"), and turf wars. It really shouldn't be so hard to get a product out the door. No wonder there are only 20 companies in the innovation index.
Why don't companies make innovation an essential part of the way they do business? Because it's hard. Because it requires an unwavering, wholehearted leap of faith—backed by a major investment, not only of money, but of people, processes, and infrastructure. It requires audacious goals, evangelism, consistency, education, training, diversity, expert tools, expert processes, and an environment conducive to creating sustainable innovation results that are aligned with financial outcomes.

Transforming a 100-Year-Old Product

Google (GOOG) and Apple (AAPL) are the obvious examples of companies that actually do this, of course. But let's keep it real; if your company didn't start out like Google or Apple with innovation firmly implanted in its DNA, then you might believe radical innovation within your company is unrealistic.
But it doesn't have to be. Consider the Sterno Group (a client of ours), the company that invented the "safe, portable fire" category a hundred years ago and continues to dominate the category to this day.
They demonstrate how you can turn around a "battleship"—if you want it enough. via businessweek.com
________________________________________________________________________
If you're not irate in the first 10 minutes of reading, if I don’t provoke you to revolutionize your management and leadership from think to execute, if you aren’t teetering on the brink of reaching for the Maalox, if you don’t innovate like a banshee, then I have failed you. 
To learn more about how uncanny abilities can increase your competitive advantage and top line growth contact us for a consultation. 
Jim Woods CEO & President, InnoThink Group
A leading strategy, innovation and hypercompetition consultancy.
www.innothinkgroup.com
719-649-4118

A Secret to Creative Problem Solving: Entrepreneur



Ever find yourself going over and over a problem in your business, only to hit a dead end or draw a blank?

Find an innovative solution with one simple technique: re-describe the problem.
"The whole idea behind creative problem solving is the assumption that you know something that will help solve this problem, but you're not thinking of it right now," explains Art Markman, cognitive psychologist and author of "Smart Thinking." Put another way, your memory hasn't found the right cue to retrieve the information you need.

Changing the description tells your mind that you're in a different situation, which unlocks a new set of memories. "The more different ways you describe the problem you're trying to solve, the more different things you know about that you will call to mind," says Markman.

Ask yourself two questions:

1. What type of problem is this?

Most of the time, we get stuck on a problem because our focus is too narrow. When you think specifically, you limit your memory and stifle creativity.

Instead, think more abstractly. Find the essence of the problem.

Take vacuum cleaner filters, for example. Vacuums used to have bags that were constantly getting clogged, so innovators focused on how to make a better filter.
James Dyson realized that the problem was actually about separation, or separating the dirt from the air, which doesn't always require a filter. "That freed him to try lots of different methods of separation," says Markman. Hence: the Dual Cyclone vacuum that led Dyson to fame and fortune.

2. Who else has faced this type of problem?

When you think about your problem abstractly, you realize that other people have solved the same type of problem in radically different ways. One of their solutions may hold the key to yours.

For example, Dyson realized sawmills use an industrial cyclone to separate sawdust from air and modified that technology to create the first filter-free vacuum.
"When you begin to realize that the problem you're trying to solve has been solved over and over again by people in other areas, you can look at the solutions they came up with to help you solve your own," Markman says.

You may not use one of their solutions exactly, but you free your memory to retrieve more information, making that elusive "aha" moment easier to reach.


By re-describing the problem, you're much more likely to find inspiration for a truly creative innovation.

What creative ways have you come up with in problem solving? via entrepreneur.com

To learn more about how uncanny abilities can increase your competitive advantage and top line growth contact us for a consultation.

Jim Woods CEO & President, InnoThink Group
A leading strategy, innovation and hypercompetition consultancy.
719-266-6703

8 Rules For Creating A Passionate Work Culture

Several years ago I was in the Thomson Building in Toronto. I went down the hall to the small kitchen to get myself a cup of coffee. Ken Thomson was there, making himself some instant soup. At the time, he was the ninth-richest man in the world, worth approximately $19.6 billion. Enough, certainly, to afford a nice lunch. I looked at the soup he was stirring. “It suits me just fine,” he said, smiling.
Thomson understood value. Neighbors reported seeing him leave his local grocery store with jumbo packages of tissues that were on sale. He bought off-the-rack suits and had his old shoes resoled. Yet he had no difficulty paying almost $76 million for a painting (for Peter Paul Rubens’s Massacre of the Innocents, in 2002). He sought value, whether it was in business, art, or groceries.
In 1976, Thomson inherited a $500-million business empire that was built on newspapers, publishing, travel agencies, and oil. By the time he died, in 2006, his empire had grown to $25 billion.
He left both a financial legacy and an art legacy, but his most lasting legacy might be the culture he created. Geoffrey Beattie, who worked closely with him, said that Ken wasn’t a business genius. His success came from being a principled investor and from surrounding himself with good people and staying loyal to them. In return he earned their loyalty.
For the long-term viability of any enterprise, Thomson understood that you needed a viable corporate culture. It, too, had to be long-term. So he cultivated good people and kept them. Thomson worked with honest and competent business managers and gave them his long-term commitment and support. From these modest principles, an empire grew.
Thomson created a culture that extended out from him and has lived after him. Here are eight rules for creating the right conditions for a culture that reflects your creed:
1. Hire the right people
Hire for passion and commitment first, experience second, and credentials third. There is no shortage of impressive CVs out there, but you should try to find people who are interested in the same things you are. You don’t want to be simply a stepping stone on an employee’s journey toward his or her own (very different) passion. Asking the right questions is key: What do you love about your chosen career? What inspires you? What courses in school did you dread? You want to get a sense of what the potential employee believes.
2. Communicate
Once you have the right people, you need to sit down regularly with them and discuss what is going well and what isn’t. It’s critical to take note of your victories, but it’s just as important to analyze your losses. A fertile culture is one that recognizes when things don’t work and adjusts to rectify the problem. As well, people need to feel safe and trusted, to understand that they can speak freely without fear of repercussion.
The art of communication tends to put the stress on talking, but listening is equally important. Great cultures grow around people who listen, not just to each other or to their clients and stakeholders. It’s also important to listen to what’s happening outside your walls. What is the market saying? What is the zeitgeist? What developments, trends, and calamities are going on?
3. Tend to the weeds
A culture of passion capital can be compromised by the wrong people. One of the most destructive corporate weeds is the whiner. Whiners aren’t necessarily public with their complaints. They don’t stand up in meetings and articulate everything they think is wrong with the company. Instead, they move through the organization, speaking privately, sowing doubt, strangling passion. Sometimes this is simply the nature of the beast: they whined at their last job and will whine at the next. Sometimes these people simply aren’t a good fit. Your passion isn’t theirs. Constructive criticism is healthy, but relentless complaining is toxic. Identify these people and replace them.
4. Work hard, play hard
To obtain passion capital requires a work ethic. It’s easy to do what you love. In the global economy we can measure who has a superior work ethic, who is leading in productivity. Not many industries these days thrive on a forty-hour work week. A culture where everyone understands that long hours are sometimes required will work if this sacrifice is recognized and rewarded.
5. Be ambitious
“Make no little plans: they have no magic to stir men’s blood.” These words were uttered by Daniel Burnham, the Chicago architect whose vision recreated the city after the great fire of 1871. The result of his ambition is an extraordinary American city that still has the magic to stir men’s blood. Ambition is sometimes seen as a negative these days, but without it we would stagnate. You need a culture that supports big steps and powerful beliefs. You can see these qualities in cities that have transformed themselves. Cities are the most visible examples of successful and failed cultures. Bilbao and Barcelona did so and became the envy of the world and prime tourist destinations. Pittsburgh reinvented itself when the steel industry withered. But Detroit wasn’t able to do the same when the auto industry took a dive.
6. Celebrate differences 
When choosing students for a program, most universities consider more than just marks. If you had a dozen straight-A students who were from the same socio-economic background and the same geographical area, you might not get much in the way of interesting debate or interaction. Great cultures are built on a diversity of background, experience, and interests. These differences generate energy, which is critical to any enterprise.
7. Create the space 
Years ago, scientists working in laboratories were often in underground bunkers and rarely saw their colleagues; secrecy was prized. Now innovation is prized. In cutting-edge research and academic buildings, architects try to promote as much interaction as possible. They design spaces where people from different disciplines will come together, whether in workspace or in common leisure space. Their reasoning is simple: it is this interaction that helps breed revolutionary ideas. Creative and engineering chat over coffee. HR and marketing bump into one another in the fitness center. Culture is made in the physical space. Look at your space and ask, “Does it promote interaction and connectivity?”
8. Take the long view 

If your culture is dependent on this quarter’s earnings or this month’s sales targets, then it is handicapped by short-term thinking. Passion capitalists take the long view. We tend to overestimate what we can do in a year, but underestimate what we can do in five years. The culture needs to look ahead, not just in months but in years and even decades.
The writer Arthur Koestler said that a writer’s ambition should be to trade a hundred contemporary readers for ten readers in ten years’ time and for one reader in a hundred years’ time. Lasting influence is better than a burst of fame. Keep an eye on the long view.
Excerpted from Passion Capital: The World's Most Valuable Asset © 2012 by Paul Alofs. Published by Signal, a division of Random House of Canada Limited. Reproduced by arrangement with the Publisher. All rights reserved.
[Image: Flickr user PurpleMattFish]

_________________________________________________________________________
If you're not irate in the first 10 minutes of reading, if I don’t provoke you to revolutionize your management and leadership from think to execute, if you aren’t teetering on the brink of reaching for the Maalox, if you don’t innovate like a banshee, then I have failed you. 
To learn more about how uncanny abilities can increase your competitive advantage and top line growth contact us for a consultation. 
Jim Woods CEO & President, InnoThink Group
A leading strategy, innovation and hypercompetition consultancy.
www.innothinkgroup.com
719-649-4118